Crane range
All KenzFigee’s up-tower crane types are electrically-powered, equipped with winches on the boom and designed as a temporary Zero-Emission-Crane™. Depending on the nature of the operation, different crane types and capacities may be deployed.

TeleHook™
The TeleHook™ is able to exchange yaw drives and roof panel lifts, as well as up-tower hoisting and installation of the larger Heli-Hook™ crane. Normally it can be positioned up-tower using the nacelle’s internal hoist.
- Supplied in ONE 20-ft ISO container
- Safe Working Load of 0.87mT
- Fully powered by the wind turbine back feed power circuit
Examples of Major Component Exchanges or Operations & Maintenance applications:
- MCE: Yaw drive, Roof panel
- O&M: Assembly of larger Up-Tower Cranes
For more detailed technical information please contact us at sales@kenzfigee.com.

Heli-Hook™
The Heli-Hook™ up-tower crane is specifically designed to be assembled in a wind turbine nacelle to enable gearbox component exchanges or repairs on a wide range of turbines. It can also be used for up-tower hoisting and installation of the larger GenHook™ LT and GenHook™ cranes, and is positioned up-tower using the nacelle service crane of the TeleHook™.
- Supplied in ONE 20-ft ISO container
- Safe Working Load of 3mT
- Fully powered by the wind turbine back feed power circuit
- Lifted in only 2 parts and assembled in nacelle
Examples of Major Component Exchanges or Operations & Maintenance applications:
- MCE: Intermediate speed shafts, gearbox components
- O&M: Assembly of larger Up-Tower Cranes
For more detailed technical information please contact us at sales@kenzfigee.com.

GenHook™ LT
The GenHook™ LT up-tower crane is assembled in a wind turbine nacelle to enable generator, gearbox and blade replacements on most turbines in the range of 1,5MW to 10MW. Furthermore, able to hoist and install the larger RotorHook™ up-tower crane.
- Supplied in ONE 20-ft ISO container
- Safe Working Load of 10mT
- Fully powered by the wind turbine back feed power circuit
- Lifted in 2 parts and assembled in the nacelle
Examples of Major Component Exchanges or Operations & Maintenance applications:
- MCE: Generator
- O&M: Up-Tower gearbox repairs such as Helical Module or Planetary Module Lifts
For more detailed technical information please contact us at sales@kenzfigee.com.

GenHook™
The GenHook™ up-tower crane is assembled in a wind turbine nacelle to enable generator, gearbox and blade replacements on most turbines in the range of 1,5MW to 10MW, including up-tower hoisting and installation of the larger RotorHook™ up-tower crane.
- Supplied in ONE 40-ft ISO container
- Safe Working Load of 30mT
- Fully powered by the wind turbine back feed power circuit
- Lifted in 2 or 3 parts and assembled in the nacelle
- Application: on- & offshore
Examples of Major Component Exchanges or Operations & Maintenance applications:
- MCE: Gearbox, generator, blade replacements, blade bearing, transformers
- O&M: Up-tower gearbox repairs for turbines in the 4MW to 8MW range
For more detailed technical information please contact us at sales@kenzfigee.com.

RotorHook™
The RotorHook™ up-tower crane is specifically designed as a temporary crane in a wind turbine nacelle for rotor and main shaft exchanges.
- Supplied in ONE 40-ft ISO container
- Safe Working Load of 80mT
- Fully powered by the wind turbine back feed power circuit
- Lifted completely assembled in a single lift using the GenHook™
- Turbines in the 1.5MW to 4MW range, onshore or offshore
Examples of Major Component Exchanges or Operations & Maintenance applications:
- MCE: Rotor, main bearing, main shaft
- O&M: Full drivetrain exchanges
For more detailed technical information please contact us at sales@kenzfigee.com.

BoxHook™
This zero-emission BoxHook™ up-tower crane is currently under development for deployment in the 3MW wind turbine range.
- Supplied in ONE 40-ft ISO container
- Safe Working Load of 85-130mT
- Fully powered by the wind turbine back feed power circuit
- Lifted in a single or two lift(s) using the GenHook™
- Turbines in the 3MW range, onshore or offshore
Examples of Major Component Exchanges or Operations & Maintenance applications:
- MCE: Rotor, combined drivetrain, gearbox, generator, blade replacement
- O&M: Full drivetrain exchanges
For more detailed technical information please contact us at sales@kenzfigee.com.
News & Projects
September 8, 2023
KenzFigee UK’s branch office relocated to Aberdeen
May 11, 2023
Spliethoff takes delivery of two KenzFigee built pipe handling cranes
April 4, 2023
KenzFigee wins contract award for crane delivery on East Anglia Three HVDC converter station
November 10, 2022
KENZFIGEE UK ACHIEVES SIGNIFICANT MILESTONES